CL 10,5 - CL 12

	This category comprises of warehouse machines used to stack unit loads vertically. The following are available.
	•	Pedestrian controlled with tiller, for normal stacking activity.
	•	Pedestrian controlled with fold away stand on platform suitable for larger warehouses.
	•	Sideways seated operator compartment for high intensive operations.
	CL10,5
	High lift stacker with a load capacity of 1050 kg and maximum lift of 4300mm. CL is introduced as an essential work tool for handling of pallets, cases and containers cages in small to medium duty logistic applications. High visibility simplex, duplex or triplex masts. High stability and high residual capacity put the CL as a reference point for all the stackers
	CL12
	High lift stacker with a load capacity of 1200 kg and maximum lift of 4300mm. CL is introduced as an essential work tool for handling of pallets, cases and containers cages in small to medium duty logistic applications. High visibility simplex, duplex or triplex masts. High stability and high residual capacity put the CL as a reference point for all the stackers.

	This category comprises of warehouse machines used to stack unit loads vertically. The following are available.
	•	Pedestrian controlled with tiller, for normal stacking activity.
	•	Pedestrian controlled with fold away stand on platform suitable for larger warehouses.
	•	Sideways seated operator compartment for high intensive operations.
	CN14- CNi14
	Pedestrian stacker truck with tiller and nominal capacity 1400 Kg. And lift height over 5390 mm. Suitable for medium distance and for stacking activity. The CNi version offer the forks  initial lift.
	CN20 - CNi20
	Pedestrian stacker truck with tiller and nominal capacity 2000 Kg. And lift height over 5390  mm. Suitable for medium distance and for stacking activity. The CNi version offer the forks  initial lift.

	This category comprises of warehouse machines used to stack unit loads vertically. The following are available.
	•	Pedestrian controlled with tiller, for normal stacking activity.
	•	Pedestrian controlled with fold away stand on platform suitable for larger warehouses.
	•	Sideways seated operator compartment for high intensive operations.
	CNS 14 - CNS 20
	Pedestrian stacker truck with tiller, external legs and FEM forkplate. Nominal capacity 1400 and 2000 Kg. Lift height over 5390 mm. Suitable for medium  distance and for stacking activity.

	This category comprises of warehouse machines used to stack unit loads vertically. The following are available.
	•	Pedestrian controlled with tiller, for normal stacking activity.
	•	Pedestrian controlled with fold away stand on platform suitable for larger warehouses.
	•	Sideways seated operator compartment for high intensive operations.
	CTX14 – CTXi14
	Pedestrian stacker truck with rider platform and nominal capacity 1400 Kg. And lift height over 4500 mm. Suitable for medium to long distance and for stacking activity. The CTXi version offer the forks  initial lift.
	CTX 20– CTXi20
	Pedestrian stacker truck with rider platform and nominal capacity 2000 Kg. And lift height over 4500 mm. Suitable for medium to long distance and for stacking activity. The CTXi version offer the forks  initial lift.

	The CLD and CLR  trucks are designed to work in any type of transport activity also when pallet stacking is needed. The CLD 20 is a stand-on double decker pallet truck, the CLR 12 is a stand-on high lift pallet truck. Both are designed for high turn around of goods.
	Driver’s compartment Spacious driver's seat designed for ergonomic operating conditions.  The CLD and CLR are equipped with a small seat to allow the operator to sit down while driving if necessary.  The seat height can be adjusted in 3 positions. Padded interior is provided with storage facilities for paper and working tools. The controls are easy to handle, drive direction and travel speed are controlled by a butterfly switch with integral buttons for hoist and lowering functions. A footrest on the right side of the footwell is provided to prevent fatigue during long horizontal transport runs. Standard display shows battery discharge, operating hours and error code signals
	Chassis Robust steel construction consisting of the traction unit, which accommodates the driver’s seat and all the controls, and the lift unit. Easy access to the motor for maintenance. 4-wheel structure provides optimum weight distribution and reduced pressure. Automatic level compensation, on CLD20, for the load wheels makes safer transport. Skids under the fork tips make it easier to drive over thresholds and enter the pallets from the side.
Steering Electric power steering with a steering wheel  with spinner knob, universal joint connection and chain transmission.  The small steering wheel (120mm diameter) allows greater speed and maneuverability.  The speed of the steering motor is electronically controlled by a sensor located on the universal joint to keep a safe driving during curves as well.
Drive A robust 2.0 kW shunt wound drive motor for quick acceleration and powerful ramp travel.
Hydraulics The hydraulic unit consists of a powerful high efficiency 2.0 kW pump on CLD20 and 3.0 kW on CLR12. Fine and smooth control is achieved thanks to the proportional valve technology.
Brakes Separate service brake and parking brake.  An electromagnetic brake acts as the parking brake.  The truck brakes smoothly and gradually when the butterfly is operated to reverse the truck.  Braking power is adjusted automatically by means of sensors in accordance with the load.
Battery Easily accessible for maintenance.  Battery can be easily removed thanks to the patented battery free lift and a roller track at the side.
Auxiliary equipment
•  Various drive wheels on CLD20
•  Wheel position indicator
Safety The CLD 20 and CLR 12 trucks comply with the Direttiva Macchine 98/37/CEE and are CE certified.

	The CLD and CLR  trucks are designed to work in any type of transport activity also when pallet stacking is needed. The CLD 20 is a stand-on double decker pallet truck, the CLR 12 is a stand-on high lift pallet truck. Both are designed for high turn around of goods.
	Driver’s compartment Spacious driver's seat designed for ergonomic operating conditions.  The CLD and CLR are equipped with a small seat to allow the operator to sit down while driving if necessary.  The seat height can be adjusted in 3 positions. Padded interior is provided with storage facilities for paper and working tools. The controls are easy to handle, drive direction and travel speed are controlled by a butterfly switch with integral buttons for hoist and lowering functions. A footrest on the right side of the footwell is provided to prevent fatigue during long horizontal transport runs. Standard display shows battery discharge, operating hours and error code signals.
	Chassis Robust steel construction consisting of the traction unit, which accommodates the driver’s seat and all the controls, and the lift unit. Easy access to the motor for maintenance. 4-wheel structure provides optimum weight distribution and reduced pressure. Automatic level compensation, on CLD20, for the load wheels makes safer transport. Skids under the fork tips make it easier to drive over thresholds and enter the pallets from the side.
Steering Electric power steering with a steering wheel  with spinner knob, universal joint connection and chain transmission.  The small steering wheel (120mm diameter) allows greater speed and maneuverability.  The speed of the steering motor is electronically controlled by a sensor located on the universal joint to keep a safe driving during curves as well.
Drive A robust 2.0 kW shunt wound drive motor for quick acceleration and powerful ramp travel.
Hydraulics The hydraulic unit consists of a powerful high efficiency 2.0 kW pump on CLD20 and 3.0 kW on CLR12. Fine and smooth control is achieved thanks to the proportional valve technology.
Brakes Separate service brake and parking brake.  An electromagnetic brake acts as the parking brake.  The truck brakes smoothly and gradually when the butterfly is operated to reverse the truck.  Braking power is adjusted automatically by means of sensors in accordance with the load.
Battery Easily accessible for maintenance.  Battery can be easily removed thanks to the patented battery free lift and a roller track at the side.
Auxiliary equipment
• Various drive wheels on CLD20
• Wheel position indicator
Safety The CLD 20 and CLR 12 trucks comply with the Direttiva Macchine 98/37/CEE and are CE certified.

	This category comprises of warehouse machines used to stack unit loads vertically. The following are available.
	•	Pedestrian controlled with tiller, for normal stacking activity.
	•	Pedestrian controlled with fold away stand on platform suitable for larger warehouses.
	•	Sideways seated operator compartment for high intensive operations.
	CSR 12,5
	Seated man stacker truck with nominal capacity 1250 kg and lift height over 5800 mm. Suitable for medium to long distance and for stacking activity. Available as optional the forks  initial lift. Standard electric steering system for driver’s comfort.
	CSR 16
	Seated man stacker truck with nominal capacity 1600 kg and lift height over 5800 mm. Suitable for medium to long distance and for stacking activity. Available as optional the forks  initial lift. Standard electric steering system for driver’s comfort.
	CSR 20
	Seated man stacker truck with nominal capacity 2000 Kg and lift height over 5500 mm. Suitable for medium to long distance and for stacking activity. Available as optional the forks  initial lift. Standard electric steering system for driver’s comfort.

	Innovation at the service of versatility: Agreeable style, linea compactness, soft rounded shapes, high technology, attention to detail, maximum safety: all this is IDEA Comfortable, compact, manageable, extremely versatile, and capable of transporting loads of up to 1000 Kg to heights of 5.253 mm. Only 850 mm wide, and with minimal height size with completely changeable forks outside the truck which make loading and unloading operations possible from the ground, and it moves easily in narrow aisles. Capable of carrying out any activity, even those that previously required specialist vehicles, and is articularly suitable in the case of continuous variations of backward and forward drive. IDEA seems to have been designed by the driver.
	Ergonomics and comfort: The driving position has been designed on the basis of the most modern ergonomic and functional principles in order to let the operator maintain the same level of efficiency throughout the work shift. Suitable for people of varying weight, it is characterised by rounded shapes, floor covered in soft anti-slip rubber, enveloping side cushion in athermic material and accessorised with useful storage trays or drinks holder. Provided with stationary braking system which is activated automatically in the absence of the operator, braking on release of the drive controls allowing a gradual stop in the space of a few metres and cross flow braking in addition to braking with the pedal on the load wheels, IDEA makes all manoeuvres precise and safe.
	The extremely simple controls, concentrated on the steering wheel and the multi-function lever, are activated respectively by the right and left hand: The operator’s position is therefore stable and safe
The ergonomic shape and the reduced dimensions of the hydraulically servo-assisted steering wheel, ensure maximum driving comfort making all the activation easy and gradual, even at low speed conditions and in reduced work spaces.
The multi-function lever, which houses all the controls for forward-reverse gears, stop, lifting and lowering of the load, forks rotation (optional) can be activated simply and immediately, without having to change the position of the hand.
Hour meter, battery level indicator, steering wheel position indicator (optional) make it possible to keep the state of the forklift under control.
The footboard, at only 95mm from the ground, can be hydraulically regulated in height.
The operator finds himself in a position which is diagonal in respect to the driving direction, maintaining a good view both forward and backward; no twisting of the body at each change of direction and therefore no unnecessary exertion.
Just a few minutes are all that is needed to get used to the forklift, and the operator will be able to move in total ease and maximum speed.
Versatility:
Capable of carrying all types of load which can be positioned onto forks, IDEA is particularly suitable for:
• service in any warehouse with or without shelving
• supplying production lines
• supplying trilateral overhead plant
• truck loading and unloading operations
Optimum views on all sides and upwards thanks to the great visibily lift and to the protective radial overhead guard. The operator can then at any time check, without any effort, the forklift and the load being transported, and move in total safety and efficiency.

Tell : 011 397 8796
UNIT 11 NORTHLAKE INDUSTRIAL PARK
MALCOLM MOODIE
JET PARK